Versi lengkap dengan kabel data USB RS232, dan CD software
Vibration
Meter yang dilengkapi dengan software dan kabel untuk koneksi ke PC.
Dimana hasil pengukuran bisa dianalisa, olah, simpan
Application:
Used
for measuring periodic motion, to check the imbalance and deflecting of
moving machinery. Specifically designed for present measuring various
mechanical vibration. So as to provide the data for the quality control,
run time and equipment upkeep.
Features:
*
In accordance with ISO 2954, used for periodic measurements, to detect
out-of-balance, misalignment and other mechanical faults in rotating
machines.
*
Specially designed for easy on site vibration measurement of all
rotating machinery for quality control,commissioning, and predictive
maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz~10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use "USB data output" and "RS-232 data output" to connect with PC.
Specification:
Sensor Piezoelectric Accelerometer
Measuring Range
Acceleration: 0.1~400 m/s² 0.3~1312 ft/s² 0.0~40 g Equivalent Peak
Velocity: 0.01~400 mm/s 0.004~16.0 inch/s True RMS
Displacement: 0.001~4.0 mm 0.04~160.0 mil Equivalent Peak-peak
Frequency Range Acceleration: 10 Hz ~ 1k Hz 10 Hz ~ 10k Hz
Velocity: 10 Hz ~ 1k Hz
Displacement: 10 Hz ~ 1k Hz
Accuracy 5 % of Reading + 2 digits
Metric / Imperial Conversion
Analogue Output AC Output 0~2.0 V Peak Full Scale (Load Resistance: Above 10k)
Max. Value Hold
Power Off Manual Power Off or Auto Power Off
Battery Indicator Low Battery Indicator
Data Output USB, RS-232, Bluetooth
Operating Conditions Temperature: 0~50 °C Humidity: <90 %RH
Power Supply 4 x 1.5V AAA size (UM-4) Battery
Dimensions 124 x 62x 30 mm
Weight 120 g (Not Including Batteries)
Standard Accessories:
1. Main Unit
2. Magnetic Suction Seat
3. Piezoelectric Transducer
4. Probe (Cone)
5. Probe (Spherical)
6. Carrying Case
7. Manual Book
8. USB, RS-232 data cable with software
Fitur
> Jangkauan frekuensi pengukuran yang besar.
> Dapat dihubungkan dengan komputer melalui interface RS232C.
> Mendukung sistem satuan metrik dan imperial.
> Alat yang sudah memenuhi standar ISO 2954.
> Alat yang memiliki desain untuk pengoperasian langsung di lapangan.
> Menggunakan akselerometer berkualitas tinggi.
> Dilengkapi fungsi peninjau kondisi bearing.
Spesifikasi Alat Pengukur Getaran VM6360 Vibration Meter Digital VM-6360 Alat Ukur Getaran
> Jangkauan pengukuran
> Kecepatan: 0,01 40 cm/detik2 (RMS)
> Percepatan: 0,1 400 m/detik
> Perpindahan: 0,001 4 mm
> Perputaran: 60 99.990 rpm
> Akurasi: 5% + 2 digit
> Tranduser: Akselerometer piezoelektrik
> Catu daya: 4x baterai AAA
> Dimensi: 124x62x30 mm
> Berat: 120 g (tanpa baterai)
Posting Komentar